Not Sure What You’re Looking For?

Honda Power Equipment WB30X73A

$629.00


New/Used
New
Usage
0 Hours
Availability
In Stock
Location
CENTRAL MOTOR SPORTS
Primary Color
RED
VIN
WACT3199956
Stock #
HP9956
Title
Clean
Condition
Excellent
Manufacturer
Honda Power Equipment
Model
WB30X73A

Overview

Description

Key Features
  • General purpose, centrifugal 3" pump
  • Easy starting Honda OHV commercial engine
  • 290 gal./min. capacity
  • Silicon carbide mechanical seal
  • Cast iron volute and impeller
Features
  • Easy starting Honda OHV commercial engine: The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
  • Durable silicon carbide mechanical seal: The WB30 features abrasion-resistant silicone-carbide seals for extended wear.
  • 4 vane high efficiency impeller: The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
  • Cast iron volute: The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
  • Heavy duty full frame protection: Protects the pump, while offering a convenient tie down location for transport.
  • Isolation mounted engine and pump: High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
  • Protected by Honda Oil Alert®: Protects the pump by shutting the engine off when low oil is detected.
  • 3 year residential/commercial warranty: You can rest easy, knowing your pump is covered from top to bottom for 3 full years.
  • Large strainer: The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.
Specifications
  • Engine: GX160
  • Displacement: 163cc
  • Bore and stroke: 2.7 in. x 1.8 in.
  • Compression Ratio: 9.0:1
  • Oil Alert: Std
  • Pump type: Centrifugal., Self-priming
  • Volute: Rigid Mounted Cast Iron
  • Impeller: 4 Vane Cast Iron
  • Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide
  • Priming time: 150 sec @16.4 ft.
  • Drive system: Direct
  • Discharge capacity: 290 gpm
  • Suction port diameter: 3 in. NPT
  • Discharge port diameter: 3 in. NPT
  • Total head lift: 85 ft.
  • Suction head lift: 25 ft.
  • Maximum pressure: 37 psi
  • Solids handling: N/A
  • Dimensions (LxWxH): 20.1 in.x 15.2 in. x 17.9 in.
  • Dry weight: 57 lb.
  • Fuel Capacity: 0.82 gal.
  • Run Time @ Max Discharge: 1.9 hr
  • Strainer Part #: 78325-YG4-000
  • Residential Warranty: 3 years
  • Commercial Warranty: 3 years
Accessories
  • A wide variety of hose kits, couplers, adaptors, and other accessories are available.

Specs

Engine

Engine Type
GX160
Engine Manufacturer
Honda
Engine Displacement
163cc
Bore and Stroke
2.7 in. x 1.8 in.

General

Pump Style
Centrifugal, Self-priming
Impeller
4 Vane Cast Iron
Drive System
Direct
Discharge Capacity
290 gpm
Discharge Port Diameter
3 in. NPT
Suction Diameter
3 in. NPT
Head Lift
85 ft.
Suction Head Lift
25 ft.
Max Pressure
37 psi
Weight
57 lb.

ATV Disclaimer

ATVs are recommended for those aged 16 years and older. YAMAHA recommends an approved training course. See your dealer or call 1-800-887-2887. ATV’s can be hazardous to operate.

SXS Disclaimer

Professional driver on closed course. Always protect the environment and wear your seat belt, helmet, eye protection and protective clothing. Read the owner’s manual and product warning labels before operation. Model shown with optional accessories. Vehicle specifications subject to change.